DESIGN:

A122

MAKE:

A161

BUY:

Disk:

Assembly:

The assembly of the blades to the rotorhub.

____________________

Hub - All

For info applicable to hubs ?

Hub-IVO:

For initial development

Hub-A:

For outrunner motor. Pitch bearings in plane of motor.

Hub-B:

For outrunner motor. Pitch bearings above motor.

Hub-C:

For outrunner motor. With Blade-U type

Hub-SM:

For slim mast. Rotorhub attached to electric rotor.

Hub-MF:

For Inrunner Megaflux. Rotorhub attached to electric rotor

Hub-U:

For outrunner motor. Pitch bearings in plane of motor.

Hub-X:

Upper and lower hub halves, plus ring.

Hub-Others:

This has old and the other Torque-Pitch ideas.

____________________

The ELIPPSE Propeller:

Craig Catto is the one who actually makes them.

Blade - IT:

Ideal Twist. To allow vertical descent

Blade - U:

Tow spar. No blade grip. From UniCopter

Blade - S:

Unidirectional tape spar. With blade grip. From SynchroLite

Blade - P:

Adapting a large propeller to become a rotor blade.

____________________

Synchronization:

The interlocking of the two rotors.